Silfluo

Substrate Wetting Agents

Substrate wetting agents lower the surface tension of a waterborne coating so it spreads over low-surface-energy substrates instead of pulling back, leaving full, even coverage. Silfluo's grades are polyether-modified silicones from 20 to 300 cSt that differ in what they add beyond wetting: stability across a broad pH range, a clear liquid form, low foam with acid and alkali resistance, or leveling and slip.

These additives are designed for waterborne industrial coatings. Like our leveling agents, their TDS covers composition, appearance, viscosity and function only, so addition level and compatibility are confirmed in your formulation rather than taken from a datasheet figure.

Who This Line Is For

Product Comparison

Grade Product Kinematic Viscosity (25 °C)Key Function
LF-2502 Silicone Substrate Wetting Additive for Waterborne Coatings 20–50 cStSubstrate wetting; broad pH range
LF-2504 Clear Silicone Substrate Wetting Additive 40–100 cStSubstrate wetting and leveling; clear liquid
LF-2505 Low-Foam Silicone Substrate Wetting Additive 200–300 cStSubstrate wetting; low foam; acid/alkali resistant
LF-2506 Silicone Wetting Additive with Leveling and Slip 20–40 cStWetting, leveling and slip; wide pH

Comparison values from each product's TDS; “—” = not listed for that grade; see its product page and TDS.

How to Choose

Broad pH range

LF-2502 is the low-viscosity (20–50 cSt) grade for wetting and uniform film formation across a broad pH range. LF-2506 also works over a wide pH range and adds leveling and slip.

Clear liquid and leveling

LF-2504 is a clear liquid of 40–100 cSt that supports leveling as well as wetting, for formulations where a clear additive is required.

Low foam in acidic or alkaline systems

LF-2505 adds substrate wetting with a low foam contribution and resistance to acidic or alkaline conditions. It is a yellow transparent liquid, so check color in water-white clear coats.

One additive for wetting, leveling and slip

LF-2506 combines wetting, leveling over a wide pH range and slip, while limiting foam stabilization, which can save a separate leveling additive in simpler formulations.

Related Applications

Coatings & Paints →

Substrate Wetting Agents — FAQ

Can a substrate wetting agent replace a leveling agent?

Partly. LF-2504 and LF-2506 also support leveling, so in some waterborne systems one additive is enough. Where cratering, Bénard cells or blocking are the main issue, one of our dedicated silicone leveling agents is the better tool.

Will the wetting agent add foam?

LF-2505 is chosen for low foam, and LF-2506 limits foam stabilization. LF-2502 and LF-2504 have no foam statement in their TDS, so check foam during mixing and application in your system, particularly with high-speed dispersion.

Are these grades suitable for solvent-borne coatings?

Their TDS lists waterborne industrial coatings as the application. For solvent-borne systems, start with our silicone leveling agents, which are described for organic coating formulations, and tell us the resin so we can suggest a grade.

Not sure which grade fits your process?

Send us your substrate, application method and service conditions — our technical team replies within 1 business day.

Request Technical Recommendation