Product Overview
Low foam contribution is what separates it from the other leveling grades. Silicone surfactants that improve wetting can also stabilize air bubbles introduced during mixing, pumping or spraying, which then show up as pinholes or surface defects; LF-1443 is described for formulations where that has to be kept in check. Its smooth hand feel makes it relevant wherever touch is part of the coating specification.
Key Benefits
Wetting and spread
Improves how the coating spreads over the substrate for a more uniform film.
Fewer craters
Reduces cratering while the film forms.
Smooth hand feel
Adds slip and a smooth surface touch to the dried coating.
Low foam contribution
Delivers wetting and leveling with little added foam during mixing and application.
Typical Applications
- Coating spread and film uniformity with reduced cratering
- Slip and hand feel with low foam contribution
Solution guides: Coatings & Paints
Technical Data
| Property | Typical Value |
|---|---|
| Composition | Polyether-modified silicone |
| Appearance | Colorless to pale yellow liquid |
| Kinematic Viscosity (25 °C) | 500–1000 cSt |
| Key Function | Wetting, leveling, smooth feel; low foam |
| Shelf Life | 12 months unopened at room temperature |
| Transport Classification | Non-dangerous goods |
Values from the LF-1443 technical data sheet. Complete TDS with test conditions available on request.
Formulation Guidance
No addition level is published; set it by ladder trial. Evaluate spread on the target substrate, crater count, film uniformity and hand feel against a control.
Measure foam after high-shear mixing and again after application by your production method, and inspect the panels for pinholes.
Compatible Coating Systems
Described for coatings that need wetting, leveling and a smooth surface feel with low foam. The TDS does not list resin types or carrier, so check compatibility, clarity and foam in each system where you plan to use it.
LF-1443 — Purchasing & Application FAQ
Is LF-1443 a defoamer?
No. It is a wetting and leveling additive with low foam contribution — designed not to add much foam, but it does not remove foam that is already present. Use a dedicated defoamer if your system needs one.
Can LF-1443 be used in waterborne coatings?
The TDS describes it for coatings generally and does not restrict the carrier type. It can be screened in waterborne formulations, for example next to one of the LF-25xx substrate wetting agents when slip and low foam are also wanted; confirm compatibility and foam behavior in your system.
How should I test foam contribution?
Mix the coating at production shear with and without LF-1443, then compare foam height or density immediately and after a set standing time. Inspect sprayed or rolled panels for pinholes as well.
TDS / SDS / COA & Samples
Technical Data Sheet, Safety Data Sheet and batch Certificate of Analysis are available for LF-1443, and a COA accompanies every shipment. Evaluation samples ship with starting-parameter guidance.
Packaging: 25 kg or 200 kg plastic drums, 200 kg plastic-lined steel drums and 1000 L IBCs. Shelf life 12 months from manufacture in unopened containers at room temperature.
SDS & batch COA on request · Reply within 1 business day.