Product Overview
Waterborne coatings start with a handicap on difficult substrates: water has a high surface tension, so the wet film tends to pull back from low-energy surfaces, leaving crawling, pinholes and uncovered spots. A substrate wetting additive closes that gap. LF-2502 is the broad-pH choice in the range, for formulations that are not close to neutral or that differ in pH from product to product.
Key Benefits
Wets low-energy substrates
Lowers coating surface tension so the film spreads over surfaces that waterborne coatings struggle to wet.
Fewer coverage defects
Reduces crawling, pinholes and bare spots caused by incomplete coverage.
Broad pH range
Supports wetting and uniform film formation in formulations across a broad range of pH.
Fluid, transparent liquid
A colorless to pale yellow transparent liquid of 20–50 cSt.
Typical Applications
- Wetting of low-surface-energy substrates in waterborne industrial coatings
- Uniform film formation across a broad pH range
Solution guides: Coatings & Paints
Technical Data
| Property | Typical Value |
|---|---|
| Composition | Polyether-modified silicone |
| Appearance | Colorless to pale yellow transparent liquid |
| Kinematic Viscosity (25 °C) | 20–50 cSt |
| Key Function | Substrate wetting; broad pH range |
| Shelf Life | 12 months unopened at room temperature |
| Transport Classification | Non-dangerous goods |
Values from the LF-2502 technical data sheet. Complete TDS with test conditions available on request.
Formulation Guidance
No addition level is published for LF-2502; establish it with a ladder trial. Draw the coating down on the real substrate, not only on test charts, and look for crawling, pinholes and edge pull-back.
Check the effect at the pH of the finished product and after heat-aged storage, measure foam after mixing, and confirm intercoat adhesion if the film will be overcoated.
Compatible Coating Systems
Intended for waterborne industrial coatings applied to low-surface-energy substrates, across a broad range of formulation pH. Specific resins and substrates are not listed on the TDS, so confirm compatibility and wetting on the parts you coat.
LF-2502 — Purchasing & Application FAQ
What substrates is LF-2502 intended for?
Low-surface-energy substrates in waterborne industrial coating; the TDS does not name specific ones. Plastics, oily or poorly cleaned metal and existing coatings are common difficult surfaces for waterborne systems, so test on your actual substrate.
What does broad pH range cover?
The TDS states that LF-2502 supports wetting and uniform film formation across a broad pH range but does not give numerical limits. Test it at the pH of your formulation, including after storage.
How does LF-2502 differ from LF-2506?
Both are very fluid wetting additives for waterborne coatings with a wide pH window. LF-2502 concentrates on substrate wetting, while LF-2506 adds leveling and slip and limits foam stabilization.
TDS / SDS / COA & Samples
Technical Data Sheet, Safety Data Sheet and batch Certificate of Analysis are available for LF-2502, and a COA accompanies every shipment. Evaluation samples ship with starting-parameter guidance.
Packaging: 25 kg or 200 kg plastic drums, 200 kg plastic-lined steel drums and 1000 L IBCs. Shelf life 12 months from manufacture in unopened containers at room temperature.
SDS & batch COA on request · Reply within 1 business day.