Silfluo

Fluorinated Release Agents & Surface Additives

FRA-C10 — Two-Component Solvent-Borne Fluorocarbon Release Agent

FRA-C10 is a two-component, solvent-borne fluorocarbon release agent at 30% solids. Part A is diluted with an ester solvent and mixed with Part B at 2:1 by weight, and after coating and curing it forms a dense, highly transparent film intended to resist acids, alkalis, water vapor, solvents and dust.

Packaging
15 kg set (10 kg A + 5 kg B)
Shelf life
12 months, ambient
Transport
Non-dangerous goods
Documents
TDS · SDS · COA
Request a Sample
Colorless, transparent FRA-C10 fluorocarbon release agent in a laboratory beaker

Product Overview

Where FRA-500L and FRA-20000 are solvent-free main agents that the converter dissolves and catalyzes, FRA-C10 arrives as a matched solvent-borne pair: main agent and curing agent are packed together as a 15 kg set of 10 kg Part A and 5 kg Part B. The mixed solution has a working window of 2 hours, so mix only what the coating line will use within that time.

Key Benefits

Dense, transparent film

The cured coating is described as dense and highly transparent, for release layers where clarity matters.

Resists harsh service conditions

The film is intended to withstand acids, alkalis, water vapor, solvents and dust in demanding environments.

Simple 2:1 mix by weight

One mix ratio and an ester-solvent diluent keep preparation straightforward on the coating floor.

Matched sets, non-dangerous goods

Supplied as 15 kg sets with Part A and Part B in the right proportion, shipped as non-dangerous goods.

Typical Applications

  • Release coatings that need a dense, transparent and chemically resistant film
  • Coatings exposed to acids, alkalis, water vapor, solvents and dust

Technical Data

Typical Properties
PropertyTypical Value
TypeTwo-component solvent-borne fluorocarbon release agent
AppearanceColorless transparent or pale yellow oily liquid
Solids Content30%
Cured FilmDense, highly transparent; resists acids, alkalis, water vapor, solvents and dust
Application Parameters
Supply FormPart A main agent + Part B curing agent
Mix Ratio, Part A : Part B2:1 by weight
Use Window After MixingWithin 2 hours
DiluentEster solvent
Shelf Life12 months, ambient, dry and dark
Transport ClassificationNon-dangerous goods

Values from the FRA-C10 technical data sheet. Complete TDS with test conditions available on request.

Application & Processing Guidance

Dilute Part A with a suitable solvent such as an ester solvent, add Part B at a Part A : Part B weight ratio of 2:1, and mix until uniformly dissolved.

Use the mixed coating solution as soon as possible and within 2 hours; beyond that the coating result may be affected. Coat weight, drying and cure conditions are not specified on the TDS, so determine the optimum application conditions through trials, then coat according to your requirements.

Compatible Systems & Substrates

A solvent-borne, two-component system diluted with ester solvent. The TDS does not list substrates or release-force values, so confirm wetting, cure, transparency and release on your own substrate and against the material the coating has to release.

FRA-C10 — Purchasing & Application FAQ

What release force does FRA-C10 give?

A release-force value is not published for FRA-C10. Release depends on coat weight, cure and the material in contact, so it needs to be measured in your own trials; we can supply a sample set for that.

How long is the mixed solution usable?

Within 2 hours of mixing Part A and Part B. Prepare batches sized to what the coater will use in that window, and discard material that has stood longer.

Should I choose FRA-C10 or the solvent-free FRA-500L/20000?

Choose FRA-C10 for a ready-matched solvent-borne two-component set and a dense, transparent, chemically resistant film. Choose FRA-500L or FRA-20000 when you want to set solvent, crosslinker ratio and platinum catalyst yourself and need the listed release force of 1–3 g.

TDS / SDS / COA & Samples

Technical Data Sheet, Safety Data Sheet and batch Certificate of Analysis are available for FRA-C10, and a COA accompanies every shipment. Evaluation samples ship with starting-parameter guidance.

Packaging: 15 kg sets: 10 kg Part A main agent and 5 kg Part B curing agent, in plastic or steel containers. Shelf life 12 months from manufacture, stored tightly closed at ambient temperature in a dry, ventilated place away from sunlight, heat and open flames.

SDS & batch COA on request · Reply within 1 business day.

Reply within 1 business day