Silfluo

Silicone Leveling Agents

LF-1442 — Silicone Leveling Agent for Slip and Anti-Blocking

LF-1442 is the highest-viscosity grade in the Silfluo leveling range at 2000–3000 cSt: a polyether-modified silicone that adds surface slip and anti-blocking to coatings while promoting leveling and reducing crater defects during film formation — a fit where coated surfaces stick together or show craters.

Cross-reference: comparable evaluation target Evonik TEGO Glide 410 *For comparative evaluation only; does not imply composition or performance equivalence. Confirm suitability by application testing.

Packaging
25 kg drums – 1000 L IBC
Shelf life
12 months, room temp.
Transport
Non-dangerous goods
Documents
TDS · SDS · COA
Request a Sample
Structural formula of a polyether-modified polysiloxane with (CH2)3O(C2H4O)a(C3H6O)bR′ side chains — LF-1442 silicone leveling agent for slip and anti-blocking

Product Overview

Blocking — coated surfaces sticking together when stacked, rolled or packed — and cratering often appear on the same high-throughput coating lines, and LF-1442 addresses both in one additive. Its slip and anti-blocking focus is the main reason to pick it over LF-1400, which is aimed at broad compatibility, and over LF-1443, which pairs wetting and leveling with low foaming.

Key Benefits

Surface slip

Lowers friction on the dried film, so coated surfaces slide rather than drag.

Anti-blocking

Reduces sticking between coated parts that are stacked, rolled or packed soon after drying.

Crater control

Reduces crater defects during film formation.

Leveling

Promotes flow-out for a smoother film alongside the slip effect.

Typical Applications

  • Surface slip and anti-blocking in coating formulations
  • Leveling and crater control during film formation

Solution guides: Coatings & Paints

Technical Data

Typical Properties
PropertyTypical Value
CompositionPolyether-modified silicone
AppearanceColorless to pale yellow liquid
Kinematic Viscosity (25 °C)2000–3000 cSt
Key FunctionSlip, anti-blocking, anti-cratering
Application Parameters
Shelf Life12 months unopened at room temperature
Transport ClassificationNon-dangerous goods

Values from the LF-1442 technical data sheet. Complete TDS with test conditions available on request.

Formulation Guidance

Determine the addition level by trial; none is published. Because of its 2000–3000 cSt viscosity, add LF-1442 under stirring and allow enough mixing time for full incorporation before making drawdowns.

Evaluate crater resistance on deliberately contaminated panels, coefficient of friction and blocking on the dried film, and intercoat adhesion if a further coat will follow.

Compatible Coating Systems

Described for coating formulations that need slip, anti-blocking and crater control; the TDS does not limit it to particular resins or carrier types. Confirm compatibility and film clarity in your own system.

LF-1442 — Purchasing & Application FAQ

Why choose LF-1442 for anti-blocking?

Its listed functions put slip and anti-blocking first, alongside crater control. If blocking between stacked or wound coated parts is the main complaint, it is the first grade in this range to test.

Does the high viscosity make LF-1442 harder to handle?

At 2000–3000 cSt it pours more slowly than the other grades. Allow for that when metering by volume, and make sure it is fully dispersed before you judge results.

How do I measure the anti-blocking effect?

Press coated panels face to face under a defined load, temperature and time, then rate the separation force or surface damage. Compare against an unmodified control at the same film build and drying schedule.

TDS / SDS / COA & Samples

Technical Data Sheet, Safety Data Sheet and batch Certificate of Analysis are available for LF-1442, and a COA accompanies every shipment. Evaluation samples ship with starting-parameter guidance.

Packaging: 25 kg or 200 kg plastic drums, 200 kg plastic-lined steel drums and 1000 L IBCs. Shelf life 12 months from manufacture in unopened containers at room temperature.

SDS & batch COA on request · Reply within 1 business day.

Reply within 1 business day