Silfluo

Fluorinated Release Agents & Surface Additives

FRA-500L/20000 — Solvent-Free Fluorinated Release Agent

FRA-500L and FRA-20000 are solvent-free fluorinated release agents supplied at 100% active content and cured with LF-HF12-M8 crosslinker in a platinum-catalyzed system. The coated film gives a release force of 1–3 g with an aged increase below 10 g, and the two main agents differ in viscosity: 400–600 mm²/s for FRA-500L and 18,000–22,000 mm²/s for FRA-20000.

Packaging
5–200 kg drums
Shelf life
12 months, ambient
Transport
Non-dangerous goods
Documents
TDS · SDS · COA
Request a Sample
Clear, colorless liquid in a glass beaker with a stirring rod — FRA-500L/20000 fluorinated release agent sample appearance

Product Overview

Supplying the main agent at 100% active content leaves the choice of coating solvent to the converter. It dissolves in butyl acetate, MIBK, MEK or a fluorinated solvent, alone or blended, so the coating solution can be matched to the drying line and the substrate. The crosslinker, inhibitor and platinum catalyst go in after the main agent has dissolved, and the system is described as highly reactive with stable performance.

Key Benefits

Low, stable release

A release force of 1–3 g, rising by less than 10 g after aging, as listed on the TDS.

Your choice of solvent

100% active main agents dissolve in butyl acetate, MIBK, MEK or fluorinated solvent, single or blended.

Two viscosity grades

FRA-500L at 400–600 mm²/s and FRA-20000 at 18,000–22,000 mm²/s give two starting points for the same release system.

Matched crosslinker

Both main agents are designed around LF-HF12-M8 (20–100 mm²/s) in a platinum-catalyzed addition cure.

Non-dangerous goods

The solvent-free main agents ship as non-dangerous goods in drums from 5 kg to 200 kg.

Typical Applications

  • Fluorinated release films with low, stable release force
  • Platinum-catalyzed release coating formulations dissolved in butyl acetate, MIBK, MEK or fluorinated solvent

Technical Data

Typical Properties
PropertyTypical Value
TypeSolvent-free fluorinated release agent, platinum cure
AppearanceColorless transparent or pale yellow oily liquid
Active Content100%
Viscosity, 25 °C (FRA-500L / FRA-20000)400–600 / 18,000–22,000 mm²/s
CrosslinkerLF-HF12-M8, 20–100 mm²/s
Release Force1–3 g; aged increase below 10 g
Application Parameters
Supply FormMain agent, used with separate crosslinker
Coating SolventsButyl acetate, MIBK, MEK or fluorinated solvent, single or blended
ProcessCrosslinker ratio, inhibitor, platinum level, coat weight and cure schedule set by trials
Shelf Life12 months, ambient, dry and dark
Transport ClassificationNon-dangerous goods

Values from the FRA-500L/20000 technical data sheet. Complete TDS with test conditions available on request.

Application & Processing Guidance

Fully dissolve the main agent in the chosen solvent — butyl acetate, MIBK, MEK or a fluorinated solvent, single or blended. Then add and dissolve the LF-HF12-M8 crosslinker, followed by the inhibitor, platinum catalyst and any other additives, and stir until uniform.

Use the prepared coating solution as soon as possible, because prolonged standing may affect coating performance. Crosslinker ratio, inhibitor level, platinum level, coat weight and cure schedule are not fixed on the TDS and must be established by trials on your own substrate and coater. Keep the main agent away from strong oxidizers, corrosive materials, acids and alkalis.

Compatible Systems & Substrates

Formulated as the main agent of a platinum-cure fluorinated release coating with LF-HF12-M8 crosslinker, applied from butyl acetate, MIBK, MEK or fluorinated solvent. Substrates are not specified on the TDS, so confirm wetting, anchorage and release on your film or paper in coating trials.

FRA-500L/20000 — Purchasing & Application FAQ

What is the difference between FRA-500L and FRA-20000?

The viscosity of the main agent: 400–600 mm²/s for FRA-500L and 18,000–22,000 mm²/s for FRA-20000 at 25 °C. Both list a release force of 1–3 g. Which one suits your line is best decided in coating trials, and we can supply both for side-by-side evaluation.

Which crosslinker is used with these release agents?

LF-HF12-M8, a 20–100 mm²/s crosslinker that the TDS pairs with both main agents. Request it together with your main-agent sample so the system is evaluated as designed.

Are catalyst and inhibitor levels given?

No. The TDS lists the inhibitor and platinum catalyst as components the coater adds, with their levels — together with crosslinker ratio, coat weight and cure schedule — established by trials.

Under what conditions was the release force measured?

The TDS gives 1–3 g with an aged increase below 10 g, but not the test tape, sample width, peel speed or aging conditions. Ask us for the test conditions before comparing the figures with your current liner data.

TDS / SDS / COA & Samples

Technical Data Sheet, Safety Data Sheet and batch Certificate of Analysis are available for FRA-500L/20000, and a COA accompanies every shipment. Evaluation samples ship with starting-parameter guidance.

Packaging: 5 kg, 20 kg, 25 kg and 200 kg plastic or steel drums. Shelf life 12 months from manufacture, stored tightly closed at ambient temperature in a dry, ventilated place away from sunlight, heat and open flames.

SDS & batch COA on request · Reply within 1 business day.

Reply within 1 business day