Silfluo

Silicone Leveling Agents

Silfluo silicone leveling agents are polyether-modified silicone additives that work at the coating surface while the film forms. Choose them by the defect you need to fix: poor flow, cratering, Bénard cells, pigment floating or flooding, low slip and blocking, or problems with recoating. Viscosities run from 200–500 cSt for the reactive LF-1221 to 2000–3000 cSt for LF-1442.

The TDS for these additives is short: composition, appearance, viscosity and main function. We therefore do not publish addition levels, VOC values or certifications. The selection notes below follow each grade's stated function; the final choice and level come from a dosage ladder in your own resin system.

Who This Line Is For

Product Comparison

Grade Product Kinematic Viscosity (25 °C)Key Function
LF-1221 Reactive Silicone Leveling Agent 200–500 cStReactive; wetting and leveling
LF-1344 Silicone Leveling Agent for Flow and Slip 600–1000 cStFlow, leveling, anti-floating; slip
LF-1400 Broad-Compatibility Silicone Leveling Agent 300–500 cStBroad compatibility; flow and slip
LF-1442 Silicone Leveling Agent for Slip and Anti-Blocking 2000–3000 cStSlip, anti-blocking, anti-cratering
LF-1443 Low-Foam Silicone Wetting and Leveling Additive 500–1000 cStWetting, leveling, smooth feel; low foam
LF-1444 Recoatable Silicone Leveling Agent 600–1000 cStLeveling; recoatable; acid/alkali resistant

Comparison values from each product's TDS; “—” = not listed for that grade; see its product page and TDS.

How to Choose

Flow, cratering and floating

LF-1344 targets the defects that appear during drying: it promotes flow, helps suppress Bénard cells, reduces cratering and helps prevent pigment floating and flooding, while its siloxane segments lower film friction for slip.

Recoatability

LF-1444 shares LF-1344's 600–1000 cSt viscosity range but is chosen when further coats must still adhere, with added resistance to acids and alkalis. If recoating matters more than floating control, start with LF-1444.

Slip and anti-blocking

LF-1442, at 2000–3000 cSt, is the grade for surface slip and reduced blocking between coated surfaces, with leveling and crater control as secondary effects. LF-1400 also adds slip and is the pick when the formulation is complex and compatibility is the main worry.

Low foam and hand feel

LF-1443 combines wetting, leveling and a smooth surface feel with a low contribution to foam, for systems where foam during mixing or application is already a problem.

Reactive modification

LF-1221 is the reactive grade. Besides wetting and leveling, it can be built into a resin formulation as a silicone component that adds lubricity, softness and water repellency to the film.

Related Applications

Coatings & Paints →

Silicone Leveling Agents — FAQ

What is the difference between LF-1344 and LF-1444?

They have the same viscosity range but different strengths. LF-1344 is aimed at flow and surface defects during drying: Bénard cells, cratering and pigment floating. LF-1444 is aimed at recoatable systems and adds acid and alkali resistance. Pick by the problem you see most often.

Why is no recommended dosage listed?

The TDS for these additives does not state one, and the right level depends on resin, solvent and substrate. Run a short dosage ladder in your system; tell us the resin and the defect, and we will suggest which grade to test first and a sensible range to bracket.

How should I compare a Silfluo grade with the additive I use now?

Test both in the same formulation at the same addition level and compare the defect you care about, plus recoat adhesion and foam. Our Cross-Reference Guide lists the industry benchmarks each grade can be evaluated against; send one or two matched grades rather than several similar ones at once.

Not sure which grade fits your process?

Send us your substrate, application method and service conditions — our technical team replies within 1 business day.

Request Technical Recommendation