Silfluo

Silicone Leveling Agents

LF-1344 — Silicone Leveling Agent for Flow and Slip

LF-1344 is a polyether-modified silicone leveling additive (600–1000 cSt) that targets film-formation defects: it promotes flow, helps suppress Bénard cells, reduces cratering and helps prevent pigment floating and flooding, while siloxane segments that reach the surface lower the friction of the dried film.

Cross-reference: comparable evaluation target BYK-333 *For comparative evaluation only; does not imply composition or performance equivalence. Confirm suitability by application testing.

Packaging
25 kg drums – 1000 L IBC
Shelf life
12 months, room temp.
Transport
Non-dangerous goods
Documents
TDS · SDS · COA
Request a Sample
Structural formula of a polyether-modified polysiloxane with (CH2)3O(C2H4O)a(C3H6O)bR′ side chains — LF-1344 silicone leveling agent for flow and slip

Product Overview

That makes it a defect-control additive first and a slip additive second. Lower film friction translates into better surface slip, scratch resistance and blocking resistance — useful where coated parts are stacked, wound or handled soon after drying. LF-1444 shares the same viscosity range: choose LF-1344 when the problems are pigment floating, Bénard cells and cratering, and LF-1444 when the film must be recoated or exposed to acids and alkalis.

Key Benefits

Bénard cell control

Helps suppress the convection cells that leave texture and color variation as the wet film dries.

Fewer craters

Reduces cratering during film formation for a smooth, even surface.

Even color in pigmented coatings

Helps prevent pigment floating and flooding, so the dried film shows a uniform shade.

Lower surface friction

Polysiloxane segments at the surface reduce the coefficient of friction, improving slip and scratch resistance.

Less blocking

Reduces sticking between coated surfaces that are stacked or wound after drying.

Typical Applications

  • Coating flow and leveling with reduced cratering and pigment floating/flooding
  • Surface slip, scratch resistance and anti-blocking of dried films

Solution guides: Coatings & Paints

Technical Data

Typical Properties
PropertyTypical Value
CompositionPolyether-modified silicone
AppearanceColorless to pale yellow liquid
Kinematic Viscosity (25 °C)600–1000 cSt
Key FunctionFlow, leveling, anti-floating; slip
Application Parameters
Shelf Life12 months unopened at room temperature
Transport ClassificationNon-dangerous goods

Values from the LF-1344 technical data sheet. Complete TDS with test conditions available on request.

Formulation Guidance

No addition level is published for LF-1344; establish it with a ladder trial against your current additive and an unmodified control. In pigmented systems, include a rub-up test to check floating and flooding, and inspect drawdowns for Bénard cells and craters under raking light.

Measure slip (coefficient of friction) and blocking on the dried film. If the coating will be overcoated, check intercoat adhesion as well: surface-active silicone can affect it, and recoatability is the specific strength of LF-1444.

Compatible Coating Systems

Described on the TDS for coating formulations in general, without a restriction to waterborne or solvent-borne systems. Pigmented coatings that show floating or flooding, and clear or pigmented films that need slip and anti-blocking, are the typical starting points; confirm compatibility and clarity in your binder.

LF-1344 — Purchasing & Application FAQ

LF-1344 or LF-1444 — which should I test?

Both are 600–1000 cSt polyether-modified silicones. Test LF-1344 for pigment floating, flooding, Bénard cells and cratering, plus slip and anti-blocking. Test LF-1444 if the film will be recoated or has to resist acids and alkalis.

What is a Bénard cell, and how does LF-1344 help?

Bénard cells are hexagonal convection patterns that form as solvent evaporates and surface tension varies across the wet film, leaving visible texture or color variation. LF-1344 helps even out those surface-tension differences during drying so the film flows out smoothly.

Will LF-1344 improve scratch resistance?

It can improve scratch and blocking resistance by lowering the surface friction of the dried film. It does not harden the film, so measure the result with your own scratch or mar test.

Can I compare LF-1344 with my current leveling additive?

Yes. Our Cross-Reference Guide lists the reference grade used for this product as a starting point for side-by-side trials, not as a claim of identical performance. Send us your formulation type and we will suggest a test plan.

TDS / SDS / COA & Samples

Technical Data Sheet, Safety Data Sheet and batch Certificate of Analysis are available for LF-1344, and a COA accompanies every shipment. Evaluation samples ship with starting-parameter guidance.

Packaging: 25 kg or 200 kg plastic drums, 200 kg plastic-lined steel drums and 1000 L IBCs. Shelf life 12 months from manufacture in unopened containers at room temperature.

SDS & batch COA on request · Reply within 1 business day.

Reply within 1 business day