Silfluo

Substrate Wetting Agents

LF-2504 — Clear Silicone Substrate Wetting Additive

LF-2504 is a polyether-modified silicone substrate wetting additive for waterborne industrial coatings, supplied as a clear liquid of 40–100 cSt. It lowers the surface tension of the coating to help it spread over and cover low-surface-energy substrates, and supports leveling where the formulation calls for a transparent additive.

Cross-reference: comparable evaluation target Evonik TEGO Wet KL 245 *For comparative evaluation only; does not imply composition or performance equivalence. Confirm suitability by application testing.

Packaging
25 kg drums – 1000 L IBC
Shelf life
12 months, room temp.
Transport
Non-dangerous goods
Documents
TDS · SDS · COA
Request a Sample
Structural formula of a polyether-modified polysiloxane with (CH2)3O(C2H4O)a(C3H6O)bR′ side chains — LF-2504 clear silicone substrate wetting additive

Product Overview

Clear additives matter in clear coats, tinted systems and transparent finishes, where a cloudy additive can carry through as haze in the liquid or the film. LF-2504 is the wetting grade to screen first when appearance of the liquid coating is part of the specification. Its viscosity sits between the very fluid LF-2502 and LF-2506 and the more viscous LF-2505.

Key Benefits

Substrate wetting

Helps waterborne coatings spread and cover low-surface-energy substrates, reducing bare spots.

Clear liquid

A colorless to pale yellow transparent liquid, suited to formulations where additive clarity is specified.

Supports leveling

Adds a leveling contribution alongside wetting for a more even film.

Typical Applications

  • Wetting of low-surface-energy substrates in waterborne industrial coatings
  • Wetting and leveling where a clear liquid additive is required

Solution guides: Coatings & Paints

Technical Data

Typical Properties
PropertyTypical Value
CompositionPolyether-modified silicone
AppearanceColorless to pale yellow transparent liquid
Kinematic Viscosity (25 °C)40–100 cSt
Key FunctionSubstrate wetting and leveling; clear liquid
Application Parameters
Shelf Life12 months unopened at room temperature
Transport ClassificationNon-dangerous goods

Values from the LF-2504 technical data sheet. Complete TDS with test conditions available on request.

Formulation Guidance

Set the addition level by ladder trial; the TDS does not give one. At each level, check clarity of the liquid coating and of the dried film, together with wetting on the real substrate, flow-out and foam after mixing.

Store test samples and recheck clarity and wetting after aging.

Compatible Coating Systems

For waterborne industrial coatings on low-surface-energy substrates, especially transparent or clear formulations. Resins and substrates are not listed on the TDS, so confirm compatibility and clarity in your system.

LF-2504 — Purchasing & Application FAQ

Why choose a clear liquid wetting additive?

In clear coats and transparent finishes, additive haze can carry through to the liquid or the dried film. LF-2504 is a transparent liquid, which makes it the first grade in this range to test where clarity is specified; confirm film clarity at your addition level.

Does LF-2504 also help leveling?

Yes. Besides substrate wetting, the TDS describes it as supporting wetting and leveling where a clear liquid additive is required. It is not described for slip or low foam; for those, look at LF-2506 or LF-2505.

TDS / SDS / COA & Samples

Technical Data Sheet, Safety Data Sheet and batch Certificate of Analysis are available for LF-2504, and a COA accompanies every shipment. Evaluation samples ship with starting-parameter guidance.

Packaging: 25 kg or 200 kg plastic drums, 200 kg plastic-lined steel drums and 1000 L IBCs. Shelf life 12 months from manufacture in unopened containers at room temperature.

SDS & batch COA on request · Reply within 1 business day.

Reply within 1 business day