Silfluo

Substrate Wetting Agents

LF-2505 — Low-Foam Silicone Substrate Wetting Additive

LF-2505 is a low-foam polyether-modified silicone substrate wetting additive for waterborne industrial coatings, supplied as a yellow transparent liquid of 200–300 cSt. It helps the coating wet out and cover low-surface-energy substrates while contributing little foam, and it is described for formulations exposed to acidic or alkaline conditions.

Cross-reference: comparable evaluation target Evonik TEGO Twin 4100 *For comparative evaluation only; does not imply composition or performance equivalence. Confirm suitability by application testing.

Packaging
25 kg drums – 1000 L IBC
Shelf life
12 months, room temp.
Transport
Non-dangerous goods
Documents
TDS · SDS · COA
Request a Sample
Structural formula of a polyether-modified polysiloxane with (CH2)3O(C2H4O)a(C3H6O)bR′ side chains — LF-2505 low-foam silicone substrate wetting additive

Product Overview

Foam is the usual side effect of adding a wetting surfactant to a waterborne coating, especially where the coating is pumped, sprayed or mixed at high shear. LF-2505 is aimed at those formulations, and at systems whose pH or service environment is acidic or alkaline. At 200–300 cSt it is the most viscous wetting grade in the range, and its yellow color should be checked in white and clear formulations.

Key Benefits

Low foam contribution

Wets the substrate with little added foam, for coatings that are pumped, sprayed or mixed at high shear.

Acid and alkali resistance

Described for wetting formulations that have to cope with acidic or alkaline conditions.

Covers low-energy substrates

Reduces coating surface tension so the film reaches and covers surfaces that resist wetting.

Fewer coverage defects

Helps prevent the bare spots and crawling that follow incomplete coverage.

Typical Applications

  • Wetting of low-surface-energy substrates in waterborne industrial coatings
  • Wetting formulations needing low foam and resistance to acidic or alkaline conditions

Solution guides: Coatings & Paints

Technical Data

Typical Properties
PropertyTypical Value
CompositionPolyether-modified silicone
AppearanceYellow transparent liquid
Kinematic Viscosity (25 °C)200–300 cSt
Key FunctionSubstrate wetting; low foam; acid/alkali resistant
Application Parameters
Shelf Life12 months unopened at room temperature
Transport ClassificationNon-dangerous goods

Values from the LF-2505 technical data sheet. Complete TDS with test conditions available on request.

Formulation Guidance

No addition level is published; find it by ladder trial. Measure foam after high-shear mixing and after application by your production method — spray, roller or pump transfer — and check wetting on the real substrate.

Test stability at the formulation pH after heat-aged storage, and in light-colored or clear coatings include a color check.

Compatible Coating Systems

For waterborne industrial coatings on low-surface-energy substrates, particularly formulations processed at high shear or with acidic or alkaline pH. Resins and substrates are not listed, so confirm compatibility, foam and color in your system.

LF-2505 — Purchasing & Application FAQ

Will the yellow color affect my coating?

It may in white, pastel or clear formulations. Compare the color of the liquid and the dried film at your addition level against a control before approving it.

Can LF-2505 replace a defoamer?

No. Low foam contribution means it adds little foam of its own; it does not break foam created by other ingredients or by processing.

What acidic or alkaline conditions has it been tested in?

The TDS describes resistance to acidic or alkaline conditions without listing pH limits or test conditions. Run your trial at the formulation pH and include storage stability.

TDS / SDS / COA & Samples

Technical Data Sheet, Safety Data Sheet and batch Certificate of Analysis are available for LF-2505, and a COA accompanies every shipment. Evaluation samples ship with starting-parameter guidance.

Packaging: 25 kg or 200 kg plastic drums, 200 kg plastic-lined steel drums and 1000 L IBCs. Shelf life 12 months from manufacture in unopened containers at room temperature.

SDS & batch COA on request · Reply within 1 business day.

Reply within 1 business day