Typical Technical Properties:
| Test Item | Standard | ||||
| Test Method | LR-5540 | LR-5550 | LR-5560 | LR-5561 | |
| Appearance | Visual | Pale yellow | |||
| Specific Gravity (g/cm3) | ASTM D792 | 1.4 | 1.41 | 1.42 | 1.44 |
| Hardness / shoreA | ASTM D2240 | 41 | 50 | 60 | 61 |
| Tensile Strength (MPa) | ASTM D412 | 9.5 | 9.8 | 10.2 | 9.8 |
| Elongation At Break (%) | ASTM D412 | 370 | 282 | 263 | 310 |
| Tear Strength (KN/m) | ASTM D624-B | 17 | 17 | 18 | 17 |
| Heat Resistance
225°C X 72h |
Hardness change / shore A | 4 | 2 | +2 | 2 |
| Tensile strength change % | -24 | -25 | -23 | -26 | |
| Elongation at break change % | -19 | -10 | -14 | -12 | |
| Fuel C
Volume change/% 23°C/72h |
ASTM D471 | 23 | 23 | 21 | 21 |
| Peel Strength/N/mm, with Methyl vinyl silicone rubber | 2 | 2 | 2.2 | 2 | |
| Curing Condition | 0.8 DCBP, Press cure: 120°C x 15min, Post cure: 200°C x 4h | ||||
The above values are not intended for use in preparing specifications.
Heat resistance additives need to be added to meet the requirements of heat resistance.
Features:
Exhibits superior calenderability alongside exceptional resistance to oils and solvents.